X350 drifting

Discussion in 'Walkera QRX350/QRX 350 Pro' started by Anders Vestergaard, Aug 10, 2017.

  1. Anders Vestergaard
    Offline

    Anders Vestergaard New Member

    Joined:
    Jul 5, 2017
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    I have a Walkera QR x350 pro. When it flies in manual mode, it drifts to the same side every time. Theres no wind. The transmitter is set to 0, so that's not where the problem lies. The drone is properly calibrated and a new compass is fitted. At startup, it also tends to tilt to the same side and therefore I have to manually compensate for this at startup. Is there anyone who has ideas for what might be wrong?
    Propellers are correctly fitted.
    When inserted into GPS mode, it levels and doesn't drift anymore
    .
    Thank you in advance for your suggestions!
     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    4,329
    Likes Received:
    265
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +346 / 12
    There is nothing wrong. This is normal. Only GPS modes do not drift on an X350.

    Drifting is cased by uneven weight distribution, Prop differences. plus lots more. You will never get a non drifting drone unless it has GPS or Optiflow.

    Cheers Brian
     

Share This Page