Walkera Runner 250 Pro Help!

Discussion in 'Walkera Runner 250 Pro' started by Famous, Apr 6, 2017.

  1. Famous
    Offline

    Famous New Member

    Joined:
    Mar 7, 2017
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Hey Guy's,

    Got few questions with the pro:

    1. I've had my quadcopter cut out in mid flight and crash - causing skids and props to snap. (I've checked batteries and they still hold power and in good shape) just don't know what's causing the pro to just cut out and drop to the ground every now and then?

    2. I've had my pro just keep on flying higher and higher in the sky no matter how much I push the throttle to 0% it won't come down till the motors cut out and crashes. (Gps mode is turned off at this point and I still can't bring the quad down till it dies and falls)


    Any help would be great or if someone's had the same problems.

    Peace A x

     
    Last edited: Apr 6, 2017
  2. TommyLee
    Offline

    TommyLee Member

    Joined:
    Feb 17, 2017
    Messages:
    37
    Likes Received:
    8
    Trophy Points:
    8
    Ratings:
    +11 / 0
    Please ensure that your controller Devo7,10,12,F12E...etc is in factory setting.I recommend all user to do the factory reset in your controller after you buy any drone from the shop. If your throttle push to 0 %, it must come down to the ground slowly. Unless your control is lost due to the distance vetween you & 250 Pro.Did you do a calbiration before flying?
     
  3. Antonio Cesar Camolezi
    Offline

    Antonio Cesar Camolezi New Member

    Joined:
    Nov 21, 2018
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 1
    I have a similar problem. Did you find the solution?
     

Share This Page