SD card in HD camera

Discussion in 'Walkera Runner 250' started by fabioz71, Jan 1, 2018.

  1. fabioz71
    Offline

    fabioz71 New Member

    Joined:
    Jan 1, 2018
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Please, i can't take pic or video. The SD card should be windows fat32 formatted? i put a SD in the cam, but it's gone broken and non work any more, windows no more access to it! :( something not written on manual?

    Thanks

    Fabio (IT)

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    4,965
    Likes Received:
    302
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +394 / 13
    If Windows cant access it then it is broken and needs to be replaced.
     
    • Like Like x 1
  3. ayeosq
    Offline

    ayeosq New Member

    Joined:
    May 15, 2017
    Messages:
    22
    Likes Received:
    1
    Trophy Points:
    3
    Ratings:
    +1 / 0
    Try to format through CMD, it's probably just corrupted.
    You might wanna try this at your own rick though:
    1. Connect the corrupted pen drive or SD card to your computer.
    2. Click Start button and search for CMD and Right Click.
    3. Click Command Prompt (Admin). A CMD window will open.
    4. Type diskpart and press Enter.
    5. Type list disk and press Enter. A list of all the storage devices connected to your computer will be displayed.
    6. Type select disk <the number of your disk> and press Enter. (Example: select disk 1). Important: Make sure you enter the number correctly. Otherwise, you may format your internal hard drive. You can type list disk again to check whether you are going correctly. There will be a star (asterisk symbol) before the name of the selected disk.
    7. Type clean and press Enter.
    8. Type create partition primary and hit Enter.
    9. Type active.
    10. Type select partition 1.
    11. Type format fs=fat32 and press Enter. The format process will finish in a few minutes. You can write NTFS instead of fat32 if you want to carry files larger than 4 gigabytes. Don’t close the CMD until the work is finished.
     
    Last edited: Jan 2, 2018
  4. fabioz71
    Offline

    fabioz71 New Member

    Joined:
    Jan 1, 2018
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    it seems the SD are gone! :( now i have to unferstand if the Pc has something bad, or the SD reader....
     

Share This Page