Scout x4, H500 and Devo F12e Firmware

Discussion in 'Walkera Talk' started by dascrow, Jan 29, 2018.

  1. dascrow
    Offline

    dascrow Administrator Staff Member

    Joined:
    Aug 12, 2014
    Messages:
    134
    Likes Received:
    9
    Trophy Points:
    18
    Ratings:
    +9 / 0
    Greetings

    It's a long story but I own two Walkera X4s, an H500 and two F12e transmitters. I've never really flown the drones but would like to start. What firmware should I be using in the drones/transmitters? Also how do I setup the transmitters so I can use them with either the h500 or scout. I see firmware for both models of drone.
    One last question, what do I need to combine the two scouts and make an X8 scout? I ask because I originally purchased the H500 to use with a RX100 but need the extra lift of the X8.

    Thanks, Mark

    (posted via e-mail)

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,065
    Likes Received:
    314
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +408 / 13
    Update the FW in the Drones to the releases we have in our Resources section.

    The latest non Condensed FW for the F12Es is also in our resources section.

    You cannot take parts from one X4 and build an X8 the X8 has specific dual motor ESCs. Motors with counter threads and propellers. You have to buy the X8 kit.
     

Share This Page