Rodeo 150 wont bind at all

Discussion in 'Walkera Talk' started by Santos class, Nov 7, 2016.

  1. Santos class
    Offline

    Santos class New Member

    Joined:
    Nov 5, 2016
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    So what happens if my drone trashes on the floor and i cant stop the props. So now my drone will not bind to the controller just beeps. It does shoot three consecutive beeps at start up. Any ideas on what need replacement.
     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    3,823
    Likes Received:
    235
    Trophy Points:
    63
    Location:
    Sydney, Australia
    Ratings:
    +307 / 10
    Open it up and re-seat the FC and the RX.
     
  3. Santos class
    Offline

    Santos class New Member

    Joined:
    Nov 5, 2016
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Tried that but no luck
     
  4. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    3,823
    Likes Received:
    235
    Trophy Points:
    63
    Location:
    Sydney, Australia
    Ratings:
    +307 / 10
    Ok so the three parts involved are the Main Board the RX and the FC.

    I would try the main board swap out first.
     
  5. Santos class
    Offline

    Santos class New Member

    Joined:
    Nov 5, 2016
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    I had ordered the RX and is due here today. If thats not it i will try the main board.
     
  6. Santos class
    Offline

    Santos class New Member

    Joined:
    Nov 5, 2016
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Update: the part i ordered fixed the issue. Thanks everyone that lend me their knowledge.
     
  7. timmerz
    Offline

    timmerz New Member

    Joined:
    Jan 13, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    so it was deffinatly the rx
    (DEVO-RX716) part number? mine flew great i touched down hard and knocked the lock on battery door loose and the battery fell out unplugged and the drone came crashing to the ground and its not even a week old but its doing this exact same thing you described....also how do you reset the flight controller i didnt do that i tried the clear button on the rx to no avail
     

Share This Page

Search tags for this page

how to reset bind code for walkera 150 rodeo

,

rodeo 150 not binding