Receiver Monitor Setup

Discussion in 'Walkera Furious 320' started by Derick, Sep 8, 2017.

  1. Derick
    Offline

    Derick Member

    Joined:
    Dec 9, 2016
    Messages:
    30
    Likes Received:
    1
    Trophy Points:
    8
    Ratings:
    +2 / 0
    I have used Walkera Goggle 4 with my Furious 320(G), with no problem. I recently purchased an EACHINE LCD5802D 5.8G Diversity Monitor.

    Eachine LCD5802D 5802 5.8G 40CH 7 Inch FPV Monitor with DVR Build-in Battery

    It has the same frequencies under Group B, but they are in a different order
    CH1 5733
    CH2 5752
    CH3 5771
    CH4 5790
    CH5 5809
    CH6 5828
    CH7 5847
    CH8 5866

    I switched through all the channels, but I couldn't get a picture to come through. Anyone have any thoughts?

    The Furious Manual Attention (2) notes says that the Transmitter channel and receiving channel must correspond. To set both at Lets say 5733 MHz, the Furious is on CH8 and the Monitor is on CH1. Is this really a problem?

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,157
    Likes Received:
    316
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +411 / 13
    Walkera number the channels in reverse order from everyone else.

    As long as the Freqs are the same you are good.

    Cheers
     
  3. oldking80
    Offline

    oldking80 Member

    Joined:
    Sep 30, 2016
    Messages:
    105
    Likes Received:
    4
    Trophy Points:
    18
    Location:
    Italy
    Ratings:
    +5 / 0
    Hai impostato correttamente la modalità PAL / NTSC sugli occhiali?
     

Share This Page