QR X530 PRO DV04 and TX 5801 connections.

Discussion in 'Walkera QRX350/QRX 350 Pro/QRX 350 Premium' started by Ozmick, Feb 22, 2017.

  1. Ozmick
    Offline

    Ozmick Member

    Joined:
    Dec 8, 2016
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Adelaide Australia
    Ratings:
    +0 / 0
    Hi. The title says it all. I have a TX 5801 & DV04 camera to go on my X350 PRO. I have ordered a switching line as well but nothing seems to mate up. Has anyone connected these to the PRO before that can help me out. Especially the power to the TX, it has a JST connector on it which the PRO does not have.
    Thanks

     
  2. Matt entrican
    Offline

    Matt entrican New Member

    Joined:
    Feb 11, 2017
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +1 / 0
    Wh a t tx and rx are u using.
    Do u mean 5801 rx?
    Are u confusing your terms?
     
  3. Matt entrican
    Offline

    Matt entrican New Member

    Joined:
    Feb 11, 2017
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +1 / 0
    Are u using the dv04 for fpv? If so u have to use the fpv converter cable which does have the jst plug and a atandard rx plug to connect to the rx
     
  4. Matt entrican
    Offline

    Matt entrican New Member

    Joined:
    Feb 11, 2017
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +1 / 0
    I spoke before thinking
    What are you trying to acomplish with the dv04? Just aerial photo and video or an fpv setup. What controller and receiver are u using?
     
  5. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,069
    Likes Received:
    314
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +408 / 13
    The pro is not designed for that configuration. You need to create your own wiring harness.

    It was created for the Walkera V450D01 and V450D03 Helicopters.

    The JST connector requires 11.1V 3S lipo input.
     
    • Like Like x 1

Share This Page

Search tags for this page

dv04 connections