qr x350 pro firmware update

Discussion in 'Walkera Talk' started by Murr00, Feb 22, 2015.

  1. Murr00
    Offline

    Murr00 New Member

    Joined:
    Feb 7, 2015
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    New to drones can't find firmware update for qr x350 pro. went to walkers websites no firmware update
     
  2. DisposableHero
    Offline

    DisposableHero New Member

    Joined:
    Feb 16, 2016
    Messages:
    10
    Likes Received:
    1
    Trophy Points:
    3
    Ratings:
    +1 / 0
    There's a download link in the description of the video (open in youtube), although I found one that had the tool included as well.. from here:

    Firmware Updater

    To install the driver I found the easiest way is to just install mission planner. Mission planner includes drivers for arducopter controllers.

    Furthermore, I found with mine that the micro usb cable that came with the kit had a too-large head on the micro connector and it wouldn't connect fully to the qr x350 pro. I used my samsung micro usb cable and it seated much easier and actually worked.

    Once you have the firmware+tool from the site I linked, mission planner installed (Downloads | ArduPilot !!!!!!!DON'T USE THE WIZARD!!!!!!!)

    You plug in your quad, see it detect and install drivers. Open the 'serialangel.exe' tool in the zip file from iuasinc.. and follow the video. Super straight forward.

     
    Last edited: Feb 17, 2016
  3. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    3,823
    Likes Received:
    235
    Trophy Points:
    63
    Location:
    Sydney, Australia
    Ratings:
    +307 / 10
  4. Ozmick
    Offline

    Ozmick Member

    Joined:
    Dec 8, 2016
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Adelaide Australia
    Ratings:
    +0 / 0
    I just bought a new X350 and I was wondering how do I find out what firmware version it has.

    thanks

    mick
     
  5. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    3,823
    Likes Received:
    235
    Trophy Points:
    63
    Location:
    Sydney, Australia
    Ratings:
    +307 / 10
    You cant. The tools only allow you to see the version of the Bootloader.

    Walkera do not update the FW as they ship product. Its locked at the initial Firmware release.

    If the Walkera Web site has a FW update for your model then you should update the Fw to the latest release.
     
  6. Ozmick
    Offline

    Ozmick Member

    Joined:
    Dec 8, 2016
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Adelaide Australia
    Ratings:
    +0 / 0
    Thanks bjr. So you are saying that even though this is a new quad that it will still have 1.5 installed on it? I cant find anything on the Walkera website.
     
  7. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    3,823
    Likes Received:
    235
    Trophy Points:
    63
    Location:
    Sydney, Australia
    Ratings:
    +307 / 10
    Yes this is consistent with most manufacturers.

    Hmm Their main page has lost the support Link again. You can navigate to it via a circuitous route. I will Post the FW updates in our Resources section to make life easier.

    Here it is.

    FW: QR X350 Pro Original Manufacture FW and Settings.


    Cheers
     
  8. Ozmick
    Offline

    Ozmick Member

    Joined:
    Dec 8, 2016
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Adelaide Australia
    Ratings:
    +0 / 0
    Bjr I thank you for your help. But I am thoroughly confused. Do I use the QR Assistant software to load the 1.7 into the quad? I can't find it anywhere. The binary file is 240kb in size. I can see all the parameters in APM2 but from that point on I am confused. What am I attempting to upgrade here
     
  9. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    3,823
    Likes Received:
    235
    Trophy Points:
    63
    Location:
    Sydney, Australia
    Ratings:
    +307 / 10
    You must use Serial Angel. I should have deleted that previous post re APM. There are many tools to burn EEPROMs. But you also need to them to save your previous sexting and the reload.

    APM is not compatible with Any walkera product.

    You must use the correct software at the correct version if you want a satisfactory end result.

    I included serial angel in the 1.07 FW update files. It was originally shipped as the update tool in the 1.05 Update.

    Make sure you back up your settings first and restore them after the upgrade.
     
  10. Ozmick
    Offline

    Ozmick Member

    Joined:
    Dec 8, 2016
    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Adelaide Australia
    Ratings:
    +0 / 0
    Its ok mate. I thank you vety much but I found the QR Assistant software on the german website Walkera Fans. Downliaded it and it connected immediately and it says QR350PRO V1.7 IS FOUND. So I guess i dont have to do anything. Thank you so much for your help and I am sorry I troubled you.
     

Share This Page

Search tags for this page
qr x350 pro firmware
,

qrx 350 pro firmware update

,
walkera 350 pro up02 download
,
walkera pro update
,
walkera qr x350 firmware download
,

walkera qr x350 firmware update

,
walkera qr x350 pro firmware
,

walkera qr x350 pro firmware update