Needed part Info! (Mini AV cable for FPV stock camera)

Discussion in 'Walkera Runner 250' started by Afro Engineer, May 11, 2016.

  1. Afro Engineer
    Offline

    Afro Engineer New Member

    Joined:
    Apr 18, 2016
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Hey guys, i crashed and shattered the mini AV cable that connects the fpv camera to the power distribution board... I can't find the specific part name or the socket names.

    the camera being used is the stock 800Tvl that comes with the drone which is plugged via 'mini av' into the power distribution board, any help is much appreciated!

    (looking for the cable in the picture provided)

     

    Attached Files:

  2. Desode
    Offline

    Desode New Member

    Joined:
    May 11, 2016
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +1 / 0
    The cable connections are Molex ones. I havent found the 3 pin one for the original camera cable but I know that the secondary video port is 5 pin molex.
    If you have a local hobby shop ask them and they will find it for you. It is used on a LOT of FPV cameras so you can look at them and find that 3 pin jack and then get a cable for it.

    Best of luck
     
    • Informative Informative x 1
  3. Afro Engineer
    Offline

    Afro Engineer New Member

    Joined:
    Apr 18, 2016
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    thanks!
     
  4. Afro Engineer
    Offline

    Afro Engineer New Member

    Joined:
    Apr 18, 2016
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Finally found it! It's called a 'JST' connector, the one i was looking for was a female 3 pin JST connector (for future viewers in need)
     
  5. Sparky
    Offline

    Sparky New Member

    Joined:
    Apr 4, 2016
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Where did you find it? I keep getting the wrong size.
     
  6. Picaman
    Offline

    Picaman New Member

    Joined:
    Feb 24, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    I can't find the correct size 3 pin jst connector either for f210. I really don't need another camera just correct cable. Any help greatly appreciated.
     
  7. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,065
    Likes Received:
    314
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +408 / 13
    Here is a chart of JST connectors. Japanese Solder-less Terminal.

    JST Connectors.jpg
     

Share This Page