Lost of accro mode and angle mode lock

Discussion in 'Walkera Runner 250' started by baptou0407, Oct 4, 2018.

  1. baptou0407
    Offline

    baptou0407 New Member

    Joined:
    Oct 4, 2018
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Hi !
    First I'm new here so let me introduce myself. I'm a French guys who have a Runner 250 on it basic version since a year with Fatshark Dominator V3 goggles since 2 months.

    I just find a new bug on my quad recently ! When I'm in Accro mode and I push the throttle to the max during few seconds, The quadcopter make one or two swings and after that he is lock in Angle mode. There is no way to come back in accro mode excepting in landing and electricaly reboot the equipments.

    I don't know if this bug is really new ! I'm a begineer in FPV freestyle and start to use all the functionality of the runner. I recently change the power card and PID,rates, and TPA values but yesterday I reset this values and the quad have the same reaction. I will try to post a video to illustrate this phenomenon when I could.

    Thanks for yours answers

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,367
    Likes Received:
    353
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +455 / 14
    The moment you changed any settings you bricked your FC defaults.

    The runner 250 is not tuneable.

    You need to use Multiwiiwingui from our resources tab and reload the FW and default runner settings again.

    Cheers
     

Share This Page