Let me pose this question.

Discussion in 'Walkera Cameras/Videos' started by Tokugawa, Jul 31, 2017.

  1. Tokugawa
    Offline

    Tokugawa New Member

    Joined:
    Jul 30, 2017
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    I am new to FPV Gear. The set I just bought to work with my F210 came with a camera and gas head tracking. I was able to sync up the goggles and no issues except...the head tracking..maybe I'm missing something like a configuration or is it plug and play. Am I supposed to switch the cameras out Or is it only active once the drone is airborne? Any guidance would be greatly appreciated.

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,263
    Likes Received:
    328
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +428 / 13
    Head tracking requires that you utilise additional radio channels on your RX to transmit the tracking proportional signals. Depending on your RX most likely you will not have enough spare channels. The Head trackers generally connect via the Trainer PPM port on the radio.

    Cheers
     

Share This Page