hi all need help with runner 250 pro

Discussion in 'Introductions and Site Help' started by ukassassin, Dec 29, 2016.

  1. ukassassin
    Offline

    ukassassin New Member

    Joined:
    Dec 29, 2016
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    hi all my name is steve ..


    just upgraded from 250 advance to a runner 250 pro having a couple of issues if someone could help.


    1st issue: cant calbrate compass like it says in manual ,how do you do it

    2nd issue: doesnt seem to ave any power till throttle at 80% is that right

    dont want to try and fly it if its not right

    please can anyone help

    regards steve

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,069
    Likes Received:
    314
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +408 / 13
    You need to persist with the calibration. If it wont calibrate when you rotate it horizontally it means there is a lot of magnetic interference where you are doing the calibration.

    Change location and try again.

    Throttle needs 50% before it lifts off. This is the calibration for the Altitude hold barometer to keep manual flight mode consistent to GPS flight mode throttle position.

    This was an issue with the R version as it rapidly changed altitude when flipped from GPS to a Manual.
     

Share This Page