Flight Controller Problem on Runner 250

Discussion in 'Walkera Runner 250' started by lukej.melcher, Feb 12, 2017.

  1. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,462
    Likes Received:
    372
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +474 / 14
    You will need to pull the runner apart and clean all the FC and RX ribbon cables. Check them for cracks.

    It's a common problem after a heavy landing to have these develop a bad connection.

    Also check the XT60 connector solder joint. These have been know to become loose.

     
  2. Kronix12
    Offline

    Kronix12 New Member

    Joined:
    Jan 13, 2019
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Thanks a lot for your help, I figured it out, it was the ribbon cable from receiver. Ive had it out for a test flight since then [​IMG]

    Sent from my SM-A520W using Tapatalk
     
  3. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,462
    Likes Received:
    372
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +474 / 14
    Ah excellent. happy flying.

    Cheers
     

Share This Page