connecting Problem

Discussion in 'Walkera Runner 250' started by erbosch, Sep 7, 2017.

  1. erbosch
    Offline

    erbosch New Member

    Joined:
    Sep 7, 2017
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Hi guys, can help me somebody?
    After one flyght a can not connect my walkera with devo f12e - just the video is ok.
    Somebody know where can be the problem?
    Thank you a lot.
    Here is the video of my problem.



     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,320
    Likes Received:
    334
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +436 / 14
    Well,You have quite a few problems.

    The biggest is that you crashed your drone on the first flight. Bummer.

    Do you see the warning label that says extend the antenna. Follow the advice.

    You have lost the GPS. Broken off I suspect. The wire for it is up in the air not connected to anything.

    The module that is lost is the GPS and Compass.

    It is failing its self check on power up so will not do anything.

    You need to fix all the broken parts. You will also need to pull it apart and check that the Ribbon cables for the RX and the FC to the main board are not cracked or damaged.

    Cheers Brian
     

Share This Page