CHANGE MAX PROP SPEED

Discussion in 'Walkera Scout X4' started by Mayor, Aug 16, 2017.

  1. Mayor
    Offline

    Mayor New Member

    Joined:
    Jun 29, 2017
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    I did change battery to a lipo, got tired of changing AA battery every other time I wanted to fly.
    The F12E is a AA battery hog.

    What do I need to change Sensor settings to ?
     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    4,329
    Likes Received:
    265
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +346 / 12
    First thing you need to do is change the alarm voltage of the TX to its maximum setting. If you don't it will display that it has plenty of battery "Bars" but the radio will switch off in flight. Don't ask me how I know this.

    Change. System Menu -> Battery to 10.8V

    Go to Model Menu -> Sensor Setting Change to Active.

    Then go down to Voltage and set the External: V1 to active and set the voltage to your desired alarm setting.

    I would recommend you set the alarm to 3.7V per cell so 3.7 x 6 = 22.2V

    Cheers Brian
     

Share This Page