Aibao Battery charging with B6

Discussion in 'Walkera Aibao' started by wasistdas, Jul 27, 2018.

  1. wasistdas
    Offline

    wasistdas Member

    Joined:
    Aug 4, 2017
    Messages:
    65
    Likes Received:
    2
    Trophy Points:
    8
    Location:
    Kiev, Ukraine
    Ratings:
    +2 / 0
    I need a shceme of female-female cable for charging Aibao battery with B6 or GA005 or any 2S charger other than GA010.

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,374
    Likes Received:
    354
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +456 / 14
    I charge 5 Aibao batteries at a time on any smart charger. I use this cable.

    If you are going to build a female to female all you need to do is connect pin1 to pin1. 2 to 2 etc. I just paralleled up a 5 to 1 Female to Female.

    For smart chargers like the B6 you also need to connect to the charge plug as well as the balance port.

    So you need to connect pin1 of the balance lead to -VE of a battery plug connector and pin 3 to +VE. as its a 2S battery.

    I used a JST connector and then used a JST to XT60 connector so I could change with either plug. Shown with blue arrow.

    So you need the battery plug for the B5 but you don't need to use and can just connect the balance lead on a GA005 and leave the battery plug disconnected.

    Cheers Brian


    IMG_1556.jpg
     

Share This Page