14.8V 1800mah 30C for F210 3D

Discussion in 'Walkera F210 3D' started by Joseph.loh72, Dec 28, 2017.

  1. Joseph.loh72
    Offline

    Joseph.loh72 New Member

    Joined:
    Dec 28, 2017
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Hi, am new to drone flying, just got spare batteries for my wilkera F210 3D, 14.8V 4S 1800mah 30C, if I can use this? Please advise thanks.

     
  2. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,320
    Likes Received:
    334
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +436 / 14
    If they fit it should be OK.
     
  3. Joseph.loh72
    Offline

    Joseph.loh72 New Member

    Joined:
    Dec 28, 2017
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0 / 0
    Hey thanks, is there a need to trim every flight for this F210 3D model?
     
  4. bjr981s
    Offline

    bjr981s Moderator Staff Member

    Top Poster Of Month

    Joined:
    Sep 19, 2015
    Messages:
    5,320
    Likes Received:
    334
    Trophy Points:
    83
    Location:
    Sydney, Australia
    Ratings:
    +436 / 14
    You need to balance the battery placement using the lugs as indicated in the manual.

    You should not have to trim. You can trim if you must, but trimming will effect 3D flight and cause it to be unstable.
     

Share This Page